Recovery Rate Research Articles

Wild herbivores and cattle have differing effects on postfire herbaceous vegetation recovery in an African savanna.

Fire and herbivory have profound effects on vegetation in savanna ecosystems, but little is known about how different herbivore groups influence vegetation dynamics after fire. We assessed the separate and combined effects of herbivory by cattle and wild meso- and megaherbivores on postfire herbaceous vegetation cover, species richness, and species turnover in a savanna ecosystem in central Kenya. We measured these vegetation attributes for five sampling periods (from 2013 to 2017) in prescribed burns and unburned areas located within a series of replicated long-term herbivore exclosures that allow six different combinations of cattle and wild meso- and megaherbivores (elephants and giraffes). Vegetation cover (grasses, mainly) and species richness were initially reduced by burning but recovered by 15-27 months after fire, suggesting strong resilience to infrequent fire. However, the rates of recovery differed in plots accessible by different wild and domestic herbivore guilds. Wildlife (but not cattle) delayed postfire recovery of grasses, and the absence of wildlife (with or without cattle) delayed recovery of forbs. Herbivory by only cattle increased grass species richness in burned relative to unburned areas. Herbivory by cattle (with or without wildlife), however, reduced forb species richness in burned relative to unburned areas. Herbivory by wild ungulates (but not cattle) increased herbaceous species turnover in burned relative to unburned areas. Megaherbivores had negligible modifying effects on these results. This study demonstrates that savanna ecosystems are remarkably resilient to infrequent fires, but postfire grazing by cattle and wild mesoherbivores exerts different effects on recovery trajectories of herbaceous vegetation.

Evaluating the efficacy and safety of letermovir compared to valganciclovir for the prevention of human cytomegalovirus disease in adult lung transplant recipients.

Lung transplant recipients are at high risk for severe cytomegalovirus (CMV) disease. Off-label use of letermovir (LET) may avert myelotoxicity associated with valganciclovir (VGCV), but data in lung transplantation are limited. This study aims to evaluate the outcomes of LET prophylaxis among lung transplant recipients. This retrospective, matched cohort study included lung transplant recipients who received LET for primary CMV prophylaxis following VGCV intolerance. Patients were matched 1:1 to historical VGCV controls based on age, serostatus group, and time from transplant. The primary outcome was CMV breakthrough within 1 year post-LET initiation; secondary outcomes included hematologic changes. A total of 124 lung transplant recipients were included per group (32% CMV mismatch, D+R-), with LET initiated a median of 9.6 months post-transplantation. One CMV breakthrough event (0.8%) was observed in the LET group versus four (3.2%) in the VGCV group (p=.370). The median (interquartile range) white blood cell (WBC) count was3.1 (2.1-5.6)at LET initiation which increased to5.1 (3.9-7.2)at the end of follow-up (p <.001). For VGCV controls, WBC was4.8 (3.4-7.2)at baseline and5.4 (3.6-7.2)at the end of follow-up; this difference was not statistically significant (p=.395). Additionally, 98.4% of LET patients experienced ≥1 leukopenia episode in the year prior to LET compared to 71.8% the year after initiation (p <.001). Similar results were observed for neutropenia (48.4% and 17.7%, p <.001). LET prophylaxis was associated with a low rate of CMV reactivation and leukopenia recovery. LET may represent a reasonable prophylaxis option for lung transplant recipients unable to tolerate VGCV.

Preparation of hollow double-layer Pt@CeO2 nanospheres as oxidase mimetics for the colorimetric-fluorescent-SERS triple-mode detection of glutathione in serum

Glutathione (GSH) is an essential antioxidant in the human body, but its detection is difficult due to the interference of complex components in serum. Herein, hollow double-layer Pt@CeO2 nanospheres were developed as oxidase mimetics, and the light-assisted oxidase mimetics effects were found. The oxidase activity was enhanced significantly by utilizing the synergistic effect of Schottky junction and the localized surface plasmon resonance (LSPR) of Pt under UV light. A novel GSH colorimetric-fluorescent-SERS sensing platform was established, with the sensing performance notably boosted by using the light-assisted oxidase mimetics effects. This platform boasts an exceptionally low detection limit (LOD) of 0.084 μM, while the detection time was shortened from 10 min to just 2 min. The anti-interference detection with high recovery rate (96.84%–107.4 %) in real serum made it be promising for practical application.

Change of cervical flexion range of motion influences postoperative sagittal alignment of the cervical spine after laminoplasty

ObjectiveThe relationships between preoperative cervical spine range of motion (ROM) and postoperative cervical sagittal alignment (CSA), and clinical outcomes after laminoplasty (LMP) have been widely studied. However, the impact of ROM changes on postoperative CSA and clinical outcomes after LMP remains unclear. Herein, patients with cervical spondylotic myelopathy (CSM) were retrospectively analyzed to explore the association between postoperative cervical ROM changes and CSA and surgical outcomes.MethodsPatients who underwent cervical LMP at our hospital between January 2019 to June 2022 were retrospectively reviewed. CSA parameters were measured before the surgery and at the final follow-up. Loss of cervical lordosis (LCL) was defined as preoperative cervical lordosis (CL) - postoperative CL. An increase in the cervical sagittal vertical axis (I-cSVA) was defined as postoperative cervical sagittal vertical axis (cSVA) - preoperative cSVA. We defined the changes in cervical flexion range of motion (△Flex ROM, preoperative Flex ROM minus postoperative Flex ROM) > 10° as L- Flex ROM group, and △Flex ROM ≤ 10° as S- Flex ROM group. Japanese Orthopedic Association (JOA) score and visual analog score (VAS) were used to assess the surgical outcomes.ResultsThe study comprised 74 patients and the average follow-up period was 31.83 months. CL, total ROM, and Flex ROM decreased and cSVA increased after cervical LMP. LCL and I-cSVA were positively correlated with △Flex. Multiple linear regression analysis showed that a decrease in the Flex ROM was a risk factor for LCL and I-cSVA after LMP. LCL and I-cSVA were higher in the L-Flex ROM group than in the S-Flex ROM group. Postoperative JOA and the JOA recovery rate were worse in the L-Flex ROM group than in the S-Flex ROM group.ConclusionsCervical total and Flex ROM decreased after cervical LMP. The reduction of Flex ROM was associated with LCL and I-cSVA after surgery. The preservation of cervical Flex ROM helps maintain CSA after LMP. Therefore, more attention should be paid to maintaining cervical ROM to obtain good CSA and surgical effects after cervical LMP.

Evaluating the feasibility of direct contact membrane distillation and nanofiltration in ground water treatment through a techno-economic analysis

This study delves into the realm of water treatment by conducting a comprehensive techno-economic evaluation of direct contact membrane distillation (DCMD) and nanofiltration (NF) processes. While previous research has explored the technical aspects of membrane distillation (MD) and nanofiltration, there remains a notable gap in economic analyses. Our research aims to bridge this gap by assessing the financial feasibility of employing MD and NF technologies for water desalination. Specifically, we scrutinize the performance of hydrophobic microporous flat sheet membranes crafted from polytetrafluoroethylene (PTFE) supported by non-woven polypropylene (PP) in desalinating brackish water through DCMD and NF processes. By varying operating conditions such as flow rate and feed temperature, we evaluate the membrane's efficacy. Employing an analytical model based on heat and mass transfer equations, we predict process performance across diverse scenarios. Our model demonstrates a high level of accuracy, with flux predictions deviating by less than 10% when utilizing the Knudsen-molecular mechanism model. Furthermore, through a detailed design and economic analysis of industrial-scale units for both processes, we reveal that the cost of permeated water is lower with NF compared to DCMD. Specifically, our calculations indicate a water cost of 1.34 USD/m3 for DCMD at a feed temperature of 65 °C with an 80% recovery rate, positioning it as a competitive option among conventional desalination methods. Notably, our financial assessment highlights that steam cost constitutes the primary expense in DCMD operations, contingent upon heating value and fuel prices. Noteworthy findings suggest that natural gas emerges as the most cost-effective fuel for steam production in a DCMD plant. This study underscores the economic viability and potential cost efficiencies associated with NF over DCMD in water treatment applications.

Fire Vulnerability, Resilience, and Recovery Rates of Mediterranean Pine Forests Using a 33-Year Time Series of Satellite Imagery

The modification of fire regimes and their impact on vegetation recovery, soil properties, and fuel structure are current key research areas that attempt to identify the thresholds of vegetation’s susceptibility to wildfires. This study aimed to evaluate the vulnerability of Mediterranean pine forests (Pinus halepensis Mill. and Pinus pinaster Aiton) to wildfires, analyzing two major forest fires that occurred in Yeste (Spain) in 1994 and 2017, affecting over 14,000 and 3200 hectares, respectively. Four recovery regions were identified based on fire severity—calculated using the delta Normalized Burn Ratio (dNBR) index—and recurrence: areas with high severity in 2017 but not in 1994 (UB94-HS17), areas with high severity in 1994 but not in 2017 (HS94-UB17), areas with high severity in both fires (HS94-HS17), and areas unaffected by either fire (UB94-UB17). The analysis focused on examining the recovery patterns of three spectral indices—the Normalized Difference Vegetation Index (NDVI), Normalized Moisture Index (NDMI), and Normalized Burn Ratio (NBR)—using the Google Earth Engine platform from 1990 to 2023. Additionally, the Relative Recovery Indicator (RRI), the Ratio of Eighty Percent (R80P), and the Year-on-Year average (YrYr) metrics were computed to assess the spectral recovery rates by region. These three spectral indices showed similar dynamic responses to fire. However, the Mann–Kendall and unit root statistical tests revealed that the NDVI and NDMI exhibited distinct trends, particularly in areas with recurrence (HS94-HS17). The NDVI outperformed the NBR and NDMI in distinguishing variations among regions. These results suggest accelerated vegetation spectral regrowth in the short term. The Vegetation Recovery Capacity After Fire (VRAF) index showed values from low to moderate, while the Vulnerability to Fire (V2FIRE) index exhibited values from medium to high across all recovery regions. These findings enhance our understanding of how vegetation recovers from fire and how vulnerable it is to fire.

Efficacy of Bedside Index for Severity In Acute Pancreatitis (Bisap) Score As Predictor of In-Hospital Outcome in Acute Pancreatitis

Background: Acute pancreatitis is a potentially life-threatening condition characterized by inflammation of the pancreas. Early identification of patients at risk of severe disease is crucial for devising appropriate management strategies and improving outcomes. The aim of the study was to investigate the efficacy of BISAP score as predictor of in-hospital outcome in patients with acute pancreatitis. Methods: This was a longitudinal study conducted in Department of Medicine, Sir Salimullah Medical College Mitford Hospital, Dhaka from January 2023 to December 2023. After ethical approval, a total 107 subjects were included in this study based on inclusion and exclusion criteria. Severity of the disease was assessed by BISAP score. Theoutcome determinants were length of hospital stay, complete recovery, partial recovery with complication, transfer to ICU and mortality. Chi Square test, Binominal Regression analysis and Receiver operator characteristic (ROC) curve analysis were performed as applicable. p value &lt;0.05 was considered as the level of significance. Results: The mean BISAP score among 107 study participants was 2.00 ± 0.76. Patients with BISAP score ³3 had significantly increased odds of prolonged hospital stay (OR: 11.226; 95% CI: 2.985- 42.222; p&lt;0.001), higher rate of partial recovery with complications (OR: 7.302; 95.325% CI: -20.997; p&lt;0.001). &lt;0.001), and greater likelihood of intensive care unit (ICU) transfer (OR: 1.136; 95% CI: 0.968-1.333; p=0.004). A BISAP score cutoff value of ³3 was associated with increased length of hospital stay (sensitivity 91.3%, specificity 97.6%, AUC=0.945), partial recovery with complications (sensitivity 83.3%, specificity 96.4%, AUC=0.899), and ICU transfer (sensitivity 75%, specificity 80.6%, AUC=0.778).Conclusion: It can be concluded that increased BISAP score can be served as an independent predictor of in-hospital in patients with acute pancreatitis (AP). Bangladesh J Medicine 2024; 35: 88-92

Simultaneous determination of five plant hormones in cotton leaves using QuEChERS combined with HPLC‒MS/MS

BackgroundPlant hormones profoundly influence cotton growth, development, and responses to various stresses. Therefore, there is a pressing need for an efficient assay to quantify these hormones in cotton. In this groundbreaking study, we have established QuEChERS-HPLC‒MS/MS method, for the simultaneous detection of multiple plant hormones in cotton leaves, allowing the analysis and quantification of five key plant hormones.ResultsSample extraction and purification employed 0.1% acetic acid in methanol and C18 for optimal recovery of plant hormones. The method applied to cotton demonstrated excellent linearity across a concentration range of 0.05–1 mg·L−1, with linear regression coefficients exceeding 0.99. The limits of quantification (LOQs) were 20 μg·kg−1 for GA3 and 5 μg·kg−1 for the other four plant hormones. Recovery rates for the five plant hormones matrix spiked at levels of 5, 10, 100, and 1000 μg·kg−1 were in the range of 79.07% to 98.97%, with intraday relative standard deviations (RSDs) ranging from 2.11% to 8.47%. The method was successfully employed to analyze and quantify the five analytes in cotton leaves treated with plant growth regulators.ConclusionThe study demonstrates that the method is well-suited for the determination of five plant hormones in cotton. It exhibits excellent selectivity and sensitivity in detecting field samples, thus serving as a robust tool for in-depth research into cotton physiology.

Ovum Pick Up and in vitro Embryo Production using Sex Sorted Semen in Cows

Background: Ovum pick-up, a technique for extracting immature oocytes from antral follicles, with in vitro embryo production, is a way to produce large number of embryos from live donors. Methods: By transvaginal ultrasound-guided ovum pick-up, oocytes were collected from large (9-19 mm), medium (4-8 mm) and small (2-3 mm) ovarian follicles of donor cows (n=8). The recovered oocytes were classified as A, B, C, D and E grades. Oocytes were subjected toin vitro maturation, fertilization (with sex sorted semen) and culture. Cleavage and blastocyst rates were recorded on day 4 and day 7 of culture respectively. Result: Total of 278 follicles were aspirated. The follicles aspirated per cow per OPU session was 12.67±1.86. The oocyte recovery rate was 45.31±7.35. Mean percentage of grade A, B, C, D and E oocytes was 15.69±3.91, 24.97±3.02, 37.53±3.45, 19.44±3.76 and 2.38±2.38 respectively. In vitro maturation rate (IVM%) was 91.71±2.38% and fertilization rate was 90.18±1.52%. Cleavage and blastocyst rates observed was 55.1±5.90 and 24.81±2.95% respectively. The mean percentages of different grades of embryos observed was, code 1: 21.13±2.78, code 2: 14.41±3.25, code 3: 19.56±4.11 and code 4: 44.9±5.90%. Transvaginal ovum pick up can be performed repeatedly without hormonal stimulation. Sex sorted semen can be used for in vitro production of female embryos.

Effect of drug therapies on self‐reported chemosensory outcomes after COVID‐19

AbstractObjectiveThe aim of this study was to assess the relative efficacy of medications used following severe acute respiratory syndrome coronavirus‐2 (SARS‐CoV‐2) infection on self‐reported alterations in taste and/or smell function.MethodsSeven hundred and fourteen persons with self‐reported postcoronavirus disease 2019 (post‐COVID‐19) chemosensory disorders were personally interviewed regarding specific medications they were administered following the acute phase of the disease. The dependent measure—self‐reported total recovery of chemosensory symptoms—was subjected to stepwise logistic regression. Independent predictors included demographic and clinical variables, in addition to specific medications used to mitigate disease symptoms (i.e., systemic corticosteroids, oseltamivir, vitamin C, ibuprofen, hydroxychloroquine, azithromycin, ivermectin, nitazoxanide, anticoagulants, and zinc).ResultsThe median time between COVID‐19 symptom onset and the interviews was 81 days (interquartile range: 60–104). Of the 714 subjects, 249 (34.9%) reported total recovery of their chemosensory function; 437 (61.2%) had at least one treatment since the beginning of the disease. Women and those with more comorbidities had undergone more treatments. The recovery rates of the treated and nontreated groups did not differ significantly. Nonetheless, respondents who had used nitazoxanide tended to have a higher rate of self‐reported taste or smell recovery. Those who took oral zinc were less likely to improve.ConclusionsNo medication employed during the first months after SARS‐CoV‐2 infection had a clear positive effect on returning self‐reported smell or taste function to normal, although nitrazoxide trended in a positive direction. Oral zinc had a negative effect on the reported recovery of these senses.

One-Pot Preparation of Mixed-Mode Reversed-Phase Anion-Exchange Silica Sorbent and its Application in the Detection of Cyclopiazonic Acid in Feeds and Agricultural Products

A novel co-bonded octyl and pyridine silica (OPS) sorbent was prepared and applied for the solid phase extraction (SPE) of cyclopiazonic acid (CPA, a type of mycotoxin) in feed and agricultural products for the first time. A simple mixed-ligand one-pot reaction strategy was employed for OPS sorbent preparation. Nitrogen adsorption–desorption measurements, elemental analysis (EI), thermal gravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FT-IR) analysis demonstrated the successful immobilization of octyl and quaternary ammonium groups onto the surface of silica gel. The large specific surface area, high-density functional groups, and mixed-mode anion-exchange characteristics of these silica particles made them the ideal material for the efficient extraction of CPA. Additionally, the OPS sorbents displayed excellent batch-to-batch reproducibility, satisfactory reusability, and low cost. The SPE parameters were optimized to explore the ionic and hydrophobic interactions between CPA and the functional groups, and the ultra-high performance liquid chromatography coupled with triple-quadrupole tandem mass spectrometry (UPLC-MS/MS) parameters were optimized to obtain a desirable extraction efficiency and high sensitivity to CPA. Meanwhile, the OPS sorbent presented a satisfactory extraction selectivity and low matrix effect. Under the optimized conditions, our developed CPA detection method was used to determine CPA level in rice, wheat flour, corn flour, peanut, and feed samples, exhibiting a lower detection limit, better linearity, higher sensitivity, and satisfactory extraction recovery rate than previously reported methods. Therefore, our method can be preferentially used as a method for the detection of CPA in agricultural products and feeds.

Colorimetric/electrochemical dual mode detection ascorbic acid based Au@PdNi nanozyme

The low activity of nanozymes poses a significant scientific challenge, limiting their application. Developing noble metal-based nanozymes with high activity is considered as an effective strategy to address this issue. In this study, core–shell Au@PdNi nanozyme was synthesized by co-precipitating Pd2+ and Ni2+ on Au cores. The oxidase (OXD)-like property of Au@PdNi was thoroughly investigated, revealing a specific activity reaching 194.2 U mg−1. The high OXD-like activity was attributed to several factors elucidated through experimental analysis and Density Functional Theory (DFT) calculations. Firstly, the core–shell structure of Au@PdNi provides a substantial surface area for catalytic reactions. Secondly, the presence of nickel enhances the current density of the material, augmenting its catalytic activity. Lastly, the electronic interplay between the Au core and the PdNi shell layer improves the binding and reaction kinetics with the target substrate. The Au@PdNi nanozyme demonstrates remarkable performances in colorimetric and electrochemical detection of ascorbic acid (AA), exhibiting high sensitivity and selectivity. Moreover, a portable electrochemical sensor was fabricated for the determination of AA in spiked fruit samples, demonstrating satisfactory recovery rates in real sample analysis.

Microstructure and performance modification of PVDF ultrafiltration membrane via adjusting the composition of coagulation Bath

AbstractIn this paper, the effect of the composition of a nonsolvent bath on the physicochemical properties of the polyvinylidene fluoride (PVDF) ultrafiltration membranes were comprehensively investigated using the nonsolvent‐induced phase separation method. Three additives (ethanol, glycerol, or NaCl) were added to the water coagulation bath respectively to obtain different membranes. It was found that the microstructure of the membranes changed from finger‐like structure to the sponge‐like structure with the increase of additives concentration, which successfully improved the retention and mechanical properties of the membranes. In addition, the membrane surface became smoother and more hydrophilic. The membrane fabricated in 30 wt% glycerol bath exhibited outstanding comprehensive properties of retention and anti‐fouling, with a water flux of 243.5 L/(m2 h), a bovine serum albumin rejection of more than 90%, and a flux recovery rate of 97%. From mechanism analysis, the addition of ethanol, glycerol, or NaCl to the coagulation bath altered the thermodynamic stability of the polymer system, and slowed down the rate of solvent and nonsolvent diffusion from a kinetic perspective. This research provides important clues for optimizing the membrane properties, such as flux, rejection, and strength.

Insights into PVC-promoted hydrothermal carbonization of manure: Dechlorination, inorganic metals removal, and combustion behaviors

Hydrothermal carbonization (HTC) can serve as a promising route to effectively co-valorize biomass and plastic wastes for solid fuel production. However, manure-derived hydrochar for fuel application remains a significant challenge due to its high ash content and low energy density. Polyvinyl chloride (PVC), as a chlorine-containing plastic, subjected to HTC commonly results in the generation of massive acidic wastewater. Herein, we proposed a PVC-promoted HTC route for high energy–density hydrochar production. By utilizing PVC as an in situ acidic additive, the HTC condition was optimized at 275 °C, 30 min, with a PVC addition of 10 %. The hydrochar obtained under the optimized condition exhibited a higher heating value (HHV) of 25.89 MJ/kg, comparable to bituminous coals, and achieve a high energy recovery rate of nearly 70 %. Moreover, the excellent removal efficiencies of inorganic metals and chlorine both exceeding 95 % (except for Fe at 86 %) were observed, owing to the strong interactions between dechlorination and inorganic metals removal. Importantly, it was evidenced that acidic reaction environment was demonstrated to enhance the carbonization degree and modify the hydrochar formation mechanism. Furthermore, the high comprehensive combustion index S of 3.22 × 10−7 %2/( °C3·min2) and low average Ea of 134.20 kJ/mol were achieved, indicating the favorable combustion behaviors. Overall, this work systematically and comprehensively investigated the PVC-promoted HTC of manure waste for advanced solid fuel production and examined its combustion characteristics, unveiling the hydrochar formation mechanism.

Recovery of metallic lead from End-Of-Life silicon solar modules using salt bridge electrowinning

Toxic lead (Pb) in end-of-life silicon solar modules must be recovered to keep it out of the environment. Present literature on Pb recovery from solar waste is sparse and uses chemicals like nitric or hydrochloric acid. Previously, the authors reported Pb recovery from silicon modules by leaching and electrowinning in acetic acid. However, the Pb recovered from acetic solution contained a small amount of metallic Pb with the rest being lead oxides/acetates. These Pb compounds require further processing to obtain metallic Pb for reuse in solar panel solder, leading to additional cost and chemical waste. This paper reports recovery of metallic Pb using an electrochemical system with two half cells connected through a salt bridge. The salt bridge enables optimized recovery rates of Pb as high as 99.99 % for synthetic leachates. The first experiment to recover Pb from real silicon module waste shows 80 % recovery without optimization. The new method offers a low-cost, closed-loop, direct pathway to metallic Pb recovery from end-of-life silicon solar modules for reuse in new modules.

The evolution of down cow management

While improvements have been made in how non-ambulatory cattle cared for over the past 35 years, they remain a challenge to manage on farm. Cows that are down, even for several hours, are at risk of developing secondary complications, further exac­erbated by poor management and care, which impacts both their welfare and potential for recovery. Good nursing care results in better recovery rates and ensures compliance with quality assur­ance programs. Developing standard operating procedures for managing these animals, including euthanasia decision-making, is an essential step towards improving animal welfare on farm.

Similar Recovery Rate for Patients Aged between 50 and 89 Years That Go Home on the Surgery Day and Self-Administer Their Rehabilitation after Kinematically Aligned Total Knee Arthroplasty

Background: for kinematic alignment (KA) total knee arthroplasty (TKA), it was unknown whether ‘the pace of recovery’ at six weeks was different for patients with ages ranging between 50–59, 60–69, 70–79, and 80–89 years who were discharged on the surgery day and self-administered their rehabilitation. Methods: a single surgeon treated 206 consecutive patients with a KA-designed femoral component and an insert with a medial ball-in-socket, lateral flat articulation, and PCL retention. Each filled out preoperative and six-week Oxford Knee Score (OKS), Knee Society Score (KSS), Knee Function Score (KFS), and Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS, JR) questionnaires. The six-week minus preoperative value indicated improvement. Results: between age cohorts, the improvement was not different (p = 0.2319 to 0.9888). The mean improvement/six-week postoperative value was 6°/−2° for knee extension, 0°/119° for knee flexion, 7/31 for the OKS, 39/96 for the KSS, 7/64 for the KFS, and 13/62 for the KOOS. The 30-day hospital readmission rate was 1%. Conclusion: surgeons who perform KA TKA can counsel 50 to 89-year-old patients that they can be safely discharged home on the surgery day with a low risk of readmission and can achieve better function at six weeks than preoperatively when performing exercises without a physical therapist.

Enzyme variants in biosynthesis and biological assessment of different molecular weight hyaluronan

In the present study, low- and high-molecular-weight hyaluronic acids (LMW-HA and HMW-HA) were synthesized in vitro by truncated Streptococcus equisimilis hyaluronan synthases (SeHAS). The enzyme kinetic parameters were determined for each enzyme variant. The MW, structure, dispersity, and biological activity of polymers were determined by electrophoresis, FTIR spectroscopy, carbazole, cell proliferation, and cell migration assay, respectively. The specific activities were calculated as 7.5, 6.8, 4.9, and 2.8 µgHA µgenzyme−1 min−1 for SeHAS, HAS123, HAS23, and HASIntra, respectively. The results revealed SeHAS produced a polydisperse HMW-HA (268 kDa), while HAS123 and HAS23 produced a polydisperse LMW-HA (< 30 kDa). Interestingly, HASIntra produced a low-disperse LMW-HA. Kinetics studies revealed the truncated variants displayed increased Km values for two substrates when compared to the wild-type enzyme. Biological assessments indicated all LMW-HAs showed a dose-dependent proliferation activity on endothelial cells (ECs), whereas HMW-HAs exhibited an inhibitory effect. Also, LMW-HAs had the highest cell migration effect at 10 µg/mL, while at 200 µg/mL, both LMW- and HMW-HAs postponed the healing recovery rate. The study elucidated that the transmembrane domains (TMDs) of SeHAS affect the enzyme kinetics, HA-titer, HA-size, and HA-dispersity. These findings open new insight into the rational engineering of SeHAS to produce size-defined HA.Graphical abstract

Study on the Interaction Propagation Mechanism of Inter-Cluster Fractures under Different Fracturing Sequences

Horizontal-well multi-cluster fracturing is one of the most important techniques for increasing the recovery rate in unconventional oil and gas reservoir development. However, under the influence of complex induced stress fields, the mechanism of interaction and propagation of fractures within each segment remains unclear. In this study, based on rock fracture criteria, combined with the boundary element displacement discontinuity method, a two-dimensional numerical simulation model of hydraulic fracturing crack propagation in a planar plane was established. Using this model, the interaction and propagation process of inter-cluster fractures under different fracturing sequences within horizontal well segments and the mechanism of induced stress field effects were analyzed. The influence mechanism of cluster spacing, fracture design length, and fracture internal pressure on the propagation morphology of inter-cluster fractures was also investigated. The research results indicate that, when using the alternating fracturing method, it is advisable to appropriately increase the cluster spacing to weaken the inhibitory effect of induced stress around the fractures created by prior fracturing on subsequent fracturing. Compared to the alternating fracturing method, the propagation morphology of fractures under the symmetrical fracturing method is more complex. At smaller cluster spacing, fractures created by prior fracturing are more susceptible to being captured by fractures from subsequent fracturing. The findings of this study provide reliable theoretical support for the optimization design of fracturing sequences and fracturing processes in horizontal well segments.

Nile red staining for rapid screening of plastic-suspect particles in edible seafood tissues.

Concerns regarding microplastic (MP) contamination in aquatic ecosystems and its impact on seafood require a better understanding of human dietary MP exposure including extensive monitoring. While conventional techniques for MP analysis like infrared or Raman microspectroscopy provide detailed particle information, they are limited by low sample throughput, particularly when dealing with high particle numbers in seafood due to matrix-related residues. Consequently, more rapid techniques need to be developed to meet the requirements of large-scale monitoring. This study focused on semi-automated fluorescence imaging analysis after Nile red staining for rapid MP screening in seafood. By implementing RGB-based fluorescence threshold values, the need for high operator expertise to prevent misclassification was addressed. Food-relevant MP was identified with over 95% probability and differentiated from natural polymers with a 1% error rate. Comparison with laser direct infrared imaging (LDIR), a state-of-the-art method for rapid MP analysis, showed similar particle counts, indicating plausible results. However, highly variable recovery rates attributed to inhomogeneous particle spiking experiments highlight the need for future development of certified reference material including sample preparation. The proposed method demonstrated suitability of high throughput analysis for seafood samples, requiring 0.02-0.06 h/cm2 filter surface compared to 4.5-14.7 h/cm with LDIR analysis. Overall, the method holds promise as a screening tool for more accurate yet resource-intensive MP analysis methods such as spectroscopic or thermoanalytical techniques.